 |
 |
 |
 |
Driveline Disconnect
Shifter Blocks
Retail
$29.47
Web Price $26.00
View Product |
 |
 |
Driveline Disconnect
Shifter Cable
Retail
$36.12
Web Price $32.00
View Product |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
| Driveline Disconnect Parts - page 2 of 2 |
|
|
 |
|
Purchase Disconnect repair and replacement. Parts for the Superior/Remco Driveline
Disconnect Systems. Coupler components, wescon anchor, pivot arms, shifter cable, replacement bearing, spring & ball kits, yokes, sleaves, stubs and more. Can't find what your
looking for, check PAGE ONE for more parts, if still nothing, simply CONTACT US
or visit us for installations or repairs. Providing complete tow setups is our business, not our sideline. |
|
NOTE: All Shifter Housings
use the same components. Only the Actual Housing is vehicle-specific. |
|
INFO: Mouse-Over the illustration
at bottom of page for Coupler Housing parts identification.
|
|
 |
Remco Wescon, cable anchor⁄swivel
MFG# 11000110 - Retail $4.35
|
 |
|
|
 |
Remco Shift Fork (Horse Bit) pivot arms. Top is the Regular arm, middle is the dual or long arm and the bottom is the special L-arm.
MFG# regular-11000858 long-11001858 L-shaped-11001857
Retail $17.43 ⁄ $17.43 ⁄ $11.12
|
|
|
|
|
|
|
Standard cable for the coupler, original Remco cable 10' long. Can and should be cut to required length.
Also "REMEMBER", your differential moves forward and backwards in relation to the frame and also frame lifts that allow your axle to drop
away from the frame so take this into consideration when calculating your required cable length.
Do not "coil" this cable for shorter length requirements in your vehicle, 'you will be sorry if you do'.
MFG# 40000138 - Retail $34.66
|
|
|
|
|
 |
10' PTO cable for the coupler. We do not condone the use of PTO cables for operating the Shifter linkage. If the above standard cable fails, it is
the fault of your shifter adjustments, not the cable! Using PTO cables are no-more than a patch for the real problem and will sooner or later damage
the shifter. We equate the use of this cable to "using a sledge-hammer in an egg-rolling contest! We NEVER use this cable in our installations and
neither should you!!
MFG# XXXXXXXX - Retail $49.92
|
|
|
|
|
 |
Remco Driveshaft Disconnect Bearing. This bearing is for the second generation coupler yoke and tube stub. Width is .812
MFG# 40000002 - Retail $47.25
|
|
|
|
|
 |
Detent Spring and Ball Kit. Two springs and balls.
MFG# 40000005⁄3 - Retail $3.06
|
|
|
|
|
 |
Remco Driveline Disconnect small parts kit. Contains 3 rubber backed cable clamps, cable anchor clamp, anchor clamp 1/4" bolt,
nut and lock-washer, cable mounting bracket, mounting bracket screws and the cable wescon swivel. 12 pieces in-all.
MFG# 10000066 - Retail $21.36
|
|
|
|
|
 |
Coupler Yoke. Comes w/bearing and retainer. These yokes are available in 1310, 1350 and 1410 series. Yoke has 180 degree double keys. Second generation couplers made after 2007
|
|
|
|
|
 |
Disconnect Shift Sleeve. This sleeve is for 180 degree double key couplers. We do not supply single key components.
|
|
|
|
|
 |
Disconnect Tube Stub. These tube stubs are available in 2-1/2", 2-3/4", 3" and 3-1/2" tube sizes. All are for .065
wall tubing (.010 press fit). Custom diameter machining is available. These tube stubs are for double key couplers and must be used with
the second generation coupler yoke manufactured after 2007. We do not supply single key components.
|
|
|
|
|
MOUSE OVER IMAGE FOR LARGER VIEW
|
|
|
|
|
|
Page Last Updated
10/27/2023
Contents subject to change without notice |
| |
|
|
