The Unified brake are no longer produced. However, we scan the US and Canada for
complete kits on a continual basis. We carry a sizeable inventory of new and used repair parts and we're always
interested in new or excellent-used US Gear products.
Contact us if you have any for sale...
Remco Driveshaft Disconnect Shift Fork (Horse Bit)
Comes with Shift Blocks and Retainers. Used for both Driver and Passenger side linkage. (Sold as pictured) MFG# 11001058
Remco Drive Shaft Disconnect .250 Coupler Shift Rod. Comes in a 5" or 6" length. You
can simply cut the rod with a hack saw to obtain a custom length.
MFG# 5"- 11000565 6"- 11000563
Remco Driveshaft Disconnect Shift Rod Clevis.
Used for both Driver or Passenger side linkage.
MFG# 40000122
Remco Driveshaft Disconnect Clevis Clip. Used for both Driver or Passenger side linkage.
MFG# 40000120
Throttle clips are used to connect the shift rod to the Shift Fork (Horse Bit). They're available for left and right
side shift linkage configurations. If your engage linkage is on the drivers side select "Right Clip".
If your engage linkage is on the passenger side select "Left Clip". Older model Horse Bits
(uses cotter key) will need to have the top of the Horse Bit arm slightly ground down in order for the throttle clip to
rotate over the top. MFG# Left- 40000110 Right- 40000117
Remco Coupler Shift Blocks with Retainers. (Sold as pair) MFG# 11001149 used on "all" shifter housings
Remco Cable Support Bracket. Used for both left and right side engagement linkage. MFG# 11000758
Remco Control Rod Lever. Used for both left and right side engagement linkage. MFG# 11000658
Remco Control Rod Lever. Used for both left and right side engagement linkage. MFG# 11000658